GW Instek GDS-1000B Series - Trigger:bus:b1:Can:data:size; Trigger:bus:b1:Can:data:value

GDS-1000B Programming Manual
156
:TRIGger:BUS:B1:CAN:DATa:SIZe
Description
Sets or returns the length of the data string in bytes
for a CAN trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Note
This command is only applicable when the Serial
Bus Decode (DS1B-BUS) option is installed. See the
user manual for details.
Syntax
:TRIGger:BUS:B1:CAN:DATa:SIZe {<NR1>|?}
Parameter/
Return parameter
<NR1>
1~8 (bytes)
Example
:TRIGger:BUS:B1:CAN:DATa:SIZe?
>1
:TRIGger:BUS:B1:CAN:DATa:SIZe 2
:TRIGger:BUS:B1:CAN:DATa:SIZe?
>2
:TRIGger:BUS:B1:CAN:DATa:VALue
Description
Sets or returns the binary data string to be used for
a CAN trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Note
This command is only applicable when the Serial
Bus Decode (DS1B-BUS) option is installed. See the
user manual for details.
Related
Commands
:TRIGger:BUS:B1:CAN:DATa:SIZe
Syntax
:TRIGger:BUS:B1:CAN:DATa:VALue {<string>|?}
Set
Query
Set
Query