GW Instek GDS-1000B Series - DVM Commands

GDS-1000B Programming Manual
236
DVM Commands
The DVM commands are only available when the optional DVM
app is installed.
:DVM:STATE .............................................................. 236
:DVM:SOURce ........................................................... 236
:DVM:MODe .............................................................. 237
:DVM:VALue .............................................................. 237
:DVM:STATE
Description
Sets or queries the DVM state to on or off.
Syntax
:DVM:STATE {OFF | ON | ? }
Related
commands
:DVM:SOURce
:DVM:MODe
Parameter/
Return parameter
OFF
Turns the DVM off.
ON
Turns the DVM on.
Example
:DVM:STATE ON
Turns the DVM state on.
:DVM:SOURce
Description
Sets or queries the source of the DVM.
Syntax
:DVM:SOURce {CH1|CH2|CH3|CH4|?}
Related
commands
:DVM:STATE
:DVM:MODe
Parameter/
Return parameter
CH1~CH4
Channel 1 to 4.
Example
:DVM:SOURce CH1
Sets the DVM source to channel 1.
Set
Query
Set
Query