GW Instek GDS-1000B Series - Trigger:timeout:timer; Trigger:alternate; Trigger:state

COMMAND DETAILS
137
Return parameter
Returns the timeout condition (HIGH, LOW, EITHER).
Example1
:TRIGger:TIMEOut:WHEn LOW
Sets the timeout condition to low.
:TRIGger:TIMEOut:TIMER
Description
Sets or returns timeout trigger time.
Syntax
:TRIGger:TIMEOut:TIMER {<NRf> | ? }
Related
commands
:TRIGger:TIMEOut:WHEn
Parameter
<NRf>
Timeout time. (4nS to 10S).
Return parameter
Returns the timeout time as <NR3>.
Example
:TRIGger:TIMEOut:TIMER?
8.960e-05
:TRIGger:ALTernate
Description
Sets alternating between source triggers on or off
or queries its state.
Syntax
:TRIGger:ALTernate {OFF | ON |?}
Parameter
OFF
Alternate off
ON
Alternate on
Return parameter
Returns the Alternate trigger status (ON, OFF).
Example
:TRIGger:ALTernate ON
Turns on alternating between source triggers.
:TRIGger:STATe
Description
Returns the current state of the triggering system.
Syntax
:TRIGger:STATe?
Set
Query
Set
Query
Query