GW Instek GDS-1000B Series - Search:trigger:bus:b1:Uart:condition

GDS-1000B Programming Manual
202
Parameter
<string>
The number of characters in the string
depends on the data size setting. The
string must be enclosed in double
quotes, "string".
x = don’t care
1 = binary 1
0 = binary 0
Return Parameter
Returns the data value.
Example 1
:SEARCH:TRIGger:BUS:B1:I2C:DATa:SIZe 1
:SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue
"1x1x0101"
Sets the value to XXX0101
Example 2
:SEARCH:TRIGger:BUS:B1:I2C:DATa:VALue?
1X1X0101
:SEARCH:TRIGger:BUS:B1:UART
:CONDition
Description
Sets or queries the UART search triggering
condition.
Syntax
:SEARCH:TRIGger:BUS:B1:UART:CONDition
{ RXSTArt | RXDATA | RXENDPacket | TXSTArt |
TXDATA | TXENDPacket | TXPARItyerr | RXPARItyerr
| ? }
Set
Query