GW Instek GDS-1000B Series Programming Manual

COMMAND DETAILS
159
Parameter/
Return parameter
LESSthan
Triggers when the data is less than
the qualifier value.
MOREthan
Triggers when the data is greater than
the qualifier value.
EQual
Triggers when the data is equal to the
qualifier value.
UNEQual
Triggers when the data is not equal to
the qualifier value.
LESSEQual
Triggers when the data is less than or
equal to the qualifier value.
MOREEQual
Triggers when the data is more than
or equal to the qualifier value.
Example
:TRIGger:BUS:B1:LIN:DATa:QUALifier?
>EQUAL
:TRIGger:BUS:B1:LIN:DATa:QUALifier MOREthan
:TRIGger:BUS:B1:LIN:DATa:QUALifier?
>MORETHAN
:TRIGger:BUS:B1:LIN:DATa:SIZe
Description
Sets or returns the length of the data string in bytes
for the LIN trigger.
Note: Only applicable when the condition is set to
DATA or IDANDDATA.
Note
This command is only applicable when the Serial
Bus Decode (DS1B-BUS) option is installed. See the
user manual for details.
Syntax
:TRIGger:BUS:B1:LIN:DATa:SIZe {<NR1>|?}
Parameter/
Return parameter
<NR1>
1~8 (bytes)
Set
Query

GW Instek GDS-1000B Series Specifications

General

Brand	GW Instek
Model	GDS-1000B Series
Category	Test Equipment
Language	English