GW Instek GDS-1000B Series - Bus1:I2 C:sclk:source; Bus1:I2 C:sda:source; Bus1:Uart:bitrate

COMMAND DETAILS
173
Example
:BUS1:I2C:ADDRess:RWINClude ON
Includes the R/W bit in the I
2
C address.
:BUS1:I2C:SCLK:SOURce
Description
Sets or queries which channel is used for the I
2
C
SCLK source.
Syntax
:BUS1:I2C:SCLK:SOURce { CH1 | CH2 | CH3 | CH4
| ? }
Parameter/Return
parameter
CH1 to CH4
Analog channels 1 ~ 4.
Example
:BUS1:I2C:SCLK:SOURce CH1
Sets channel 1 as the SCLK source.
:BUS1:I2C:SDA:SOURce
Description
Sets or queries which channel is used for the I
2
C
SDA source.
Syntax
:BUS1:I2C:SDA:SOURce { CH1 | CH2 | CH3 | CH4 | ? }
Parameter/Return
parameter
CH1 to CH4
Analog channels 1 ~ 4.
Example
:BUS1:I2C:SDA:SOURce CH1
Sets channel 1 as the SDA source.
:BUS1:UART:BITRate
Description
Sets or queries the UART bit rate.
Syntax
:BUS1:UART:BITRate {<NR1>| ? }
Set
Query
Set
Query
Set
Query