GW Instek GDS-1000B Series - Search:trigger:bus:b1:I2 C:address:mode

GDS-1000B Programming Manual
198
Parameter
STARt
Set Start as the I
2
C search trigger
condition.
STOP
Set Stop as the I
2
C search trigger
condition.
REPEATstart
Set Repeat of Start as the I
2
C
search trigger condition.
ACKMISS
Set Missing Acknowledgement
as the I
2
C search trigger
condition.
ADDRess
Set Address as the I
2
C search
trigger condition.
DATA
Set Data as the I
2
C search trigger
condition.
ADDRANDDATA
Set Address and Data as the I
2
C
search trigger condition.
Return parameter
Returns the I
2
C bus search trigger condition.
Example
:SEARCH:TRIGger:BUS:B1:I2C:CONDition ADDRess
Set Address as the I
2
C search trigger condition.
:SEARCH:TRIGger:BUS:B1:I2C:ADDRess
:MODe
Description
Sets or queries the I
2
C addressing mode (7 or 10
bits) for the search trigger.
Syntax
:SEARCH:TRIGger:BUS:B1:I2C:ADDRess:MODe
{ADDR7 | ADDR10 | ? }
Related
commands
:SEARCH:TRIGger:BUS:B1:I2C:CONDition
Parameter
ADDR7
7 bit addressing
ADDR10
10 bit addressing
Return Parameter
0
7 bit addressing
1
10 bit addressing
Set
Query