GW Instek GDS-1000B Series - Hardcopy Commands; Hardcopy:mode; Hardcopy:start

GDS-1000B Programming Manual
78
Hardcopy Commands
:HARDcopy:START ...................................................... 78
:HARDcopy:MODe ...................................................... 78
:HARDcopy:PRINTINKSaver ....................................... 79
:HARDcopy:SAVEINKSaver ......................................... 79
:HARDcopy:SAVEFORMat .......................................... 79
:HARDcopy:ASSIGN .................................................... 80
:HARDcopy:START
Description
Executing the HARDcopy:START command is the
equivalent of pressing the Hardcopy key on the
front panel.
Syntax
:HARDcopy:START
Related
Commands
:HARDcopy:MODe
:HARDcopy:PRINTINKSaver
:HARDcopy:SAVEINKSaver
:HARDcopy:SAVEFORMat
:HARDcopy:ASSIGN
:HARDcopy:MODe
Description
Sets or queries whether hardcopy is set to print or
save.
Syntax
:HARDcopy:MODe { PRINT | SAVE | ? }
Related
Commands
:HARDcopy:START
Parameter
PRINT
Print mode
SAVE
Save mode
Return parameter
Returns the mode.(PRINT/SAVE)
Set
Set
Query