GW Instek GDS-1000B Series - Search:trigger:bus:b1:Lin:errtype; Search:trigger:bus:b1:Lin:identifier:value

COMMAND DETAILS
217
Example
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe 1
:SEARCH:TRIGger:BUS:B1:LIN:DATa:VALue
"01010X1X"
:SEARCH:TRIGger:BUS:B1:LIN:DATa:VALue?
>01010X1X
:SEARCH:TRIGger:BUS:B1:LIN:ERRTYPE
Description
Sets or returns the error type to be used for the LIN
search trigger.
Syntax
:SEARCH:TRIGger:BUS:B1:LIN:ERRTYPE
{SYNC|PARIty|CHecksum|?}
Parameter/
Return parameter
SYNC
Sets the LIN error type to SYNC.
PARIty
Sets the LIN error type to parity.
CHecksum
Sets the LIN error type to checksum.
Example
:SEARCH:TRIGger:BUS:B1:LIN:ERRTYPE?
>SYNC
:SEARCH:TRIGger:BUS:B1:LIN:ERRTYPE CHECKSUM
:SEARCH:TRIGger:BUS:B1:LIN:ERRTYPE?
>CHECKSUM
:SEARCH:TRIGger:BUS:B1:LIN:IDentifier:
VALue
Description
Sets or returns the identifier string to be used for
the LIN search trigger.
Note: Only applicable when the condition is set to
ID or IDANDDATA.
Syntax
:SEARCH:TRIGger:BUS:B1:LIN:IDentifier:VALue
{<string>|?}
Set
Query
Set
Query