GW Instek GDS-1000B Series - Label Commands; Channel<X>:Label

COMMAND DETAILS
221
Label Commands
:CHANnel<X>:LABel ..................................................221
:CHANnel<X>:LABel:DISPlay ....................................222
:REF<X>:LABel ...........................................................222
:REF<X>:LABel:DISPlay .............................................223
:BUS1:LABel ...............................................................224
:BUS1:LABel:DISPlay .................................................224
:SET<X>:LABel ...........................................................225
:CHANnel<X>:LABel
Description
Sets or returns the file label for the selected
channel.
Syntax
:CHANnel<X>:LABel {<string> | ?}
Related
commands
:CHANnel<X>:LABel:DISPlay
Parameter
<X>
Channel 1, 2, 3, 4
<string>
The string must be no more than 8
characters and only contain
alphanumeric characters in addition
to period, dash and underscore
characters. The string must be
enclosed in double quotes, “string”.
Return parameter
<string>
Returns the label for the selected
channel. No return indicates that
there has not been a file label
assigned for the selected channel.
Example1
:CHANnel1:LABel "CH1_lab"
Sets the channel 1 label as "CH1_lab".
Example2
:CHANnel1:LABel?
CH1_lab
Set
Query