GW Instek GDS-1000B Series - Acquire:interpolation; Acquire:recordlength; Acquire<X>:State

COMMAND DETAILS
45
Return parameter
ON
Tracking on
Example
:ACQuire:FILTer:TRACking ON
Turns filter tracking on.
:ACQuire<X>:STATe?
Description
Returns the status of waveform data.
Syntax
:ACQuire<X>:STATe?
Parameter
<X>
Channel number (1 to 4)
Return parameter
0
Raw data is not ready
1
Raw data is ready
Example
:ACQuire1:STATe?
0
Returns 0. Channel 1’s raw data is not ready.
Note: If the oscilloscope changes the acquisition status
from STOP to RUN, the status will be reset as zero.
:ACQuire:INTERpolation
Description
Selects or returns the interpolation mode.
Syntax
:ACQuire:INTERpolation {ET | SINC | ?}
Parameter/Return
parameter
ET
Equivalent Time interpolation. The GDS-
1000B doesn’t support ET.
SINC
Sets to SIN(X)/X interpolation.
Example
:ACQuire:INTERpolation?
>SINC
Returns SINC as the interpolation mode.
:ACQuire:RECOrdlength
Description
Sets or queries the record length.
Query
Set
Query
Set
Query