GW Instek GDS-1000B Series - Segments:current; Segments:totalnum

GDS-1000B Programming Manual
228
:SEGMents:CURRent
Description
Sets or queries the current segment. The total
number of segments depends on the record length.
Syntax
:SEGMents:CURRent
{SETTOMIN|SETTOMAX|<NR1>|?}
Related
commands
:SEGMents:STATE
:SEGMents:TOTalnum
Parameter/
Return parameter
SETTOMIN
Current segment = min segment
SETTOMAX
Current segment = max segment
<NR1>
1~29000
Example1
:SEGMents:CURRent 10
Sets the current segment to segment number 10.
:SEGMents:TOTalnum
Description
Sets or queries the total number of segments for
the segmented memory function. The total number
of segments depends on the record length.
Syntax
:SEGMents:TOTalnum
{SETTOMIN|SETTOMAX|<NR1>|?}
Related
commands
:SEGMents:STATE
:SEGMents:CURRent
Parameter/
Return parameter
SETTOMIN
Sets to the minimum number
SETTOMAX
Sets to the maximum number
<NR1>
1~29000
Example1
:SEGMents:TOTalnum SETTOMAX
Sets the number of segments to max number
(29000).
Set
Query
Set
Query