GW Instek GDS-1000B Series - Search:copy

GDS-1000B Programming Manual
188
:SEARCH:TRIGger:BUS:B1:UART:TX:DATa:VALue .. 205
:SEARCH:TRIGger:BUS:B1:SPI:CONDition .............. 206
:SEARCH:TRIGger:BUS:B1:SPI:DATa:SIZe ............... 206
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MISO:VALue . 207
:SEARCH:TRIGger:BUS:B1:SPI:DATa:MOSI:VALue . 208
:SEARCH:TRIGger:BUS:B1:CAN:CONDition ........... 208
:SEARCH:TRIGger:BUS:B1:CAN:FRAMEtype ........... 209
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:MODe .. 210
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:VALue ... 210
:SEARCH:TRIGger:BUS:B1:CAN:IDentifier:DIRection211
:SEARCH:TRIGger:BUS:B1:CAN:DATa:QUALifier ... 212
:SEARCH:TRIGger:BUS:B1:CAN:DATa:SIZe ............ 213
:SEARCH:TRIGger:BUS:B1:CAN:DATa:VALue ......... 213
:SEARCH:TRIGger:BUS:B1:LIN:CONDition ............. 214
:SEARCH:TRIGger:BUS:B1:LIN:DATa:QUALifier ..... 215
:SEARCH:TRIGger:BUS:B1:LIN:DATa:SIZe .............. 216
:SEARCH:TRIGger:BUS:B1:LIN:DATa:VALue ........... 216
:SEARCH:TRIGger:BUS:B1:LIN:ERRTYPE ................ 217
:SEARCH:TRIGger:BUS:B1:LIN:IDentifier:VALue..... 217
:SEARCH:FFTPeak:METHod ..................................... 218
:SEARCH:FFTPeak:METHod:MPEak ........................ 219
:SEARCH:FFTPeak:SINFo.......................................... 219
:SEARCH:COPY
Description
Copies the search settings to the trigger settings or
copies the trigger settings to the search settings.
Syntax
:SEARCH:COPY {SEARCHtotrigger|TRIGgertosearch}
Parameter
SEARCHtotrigger
Copy the search setting to
the trigger settings.
TRIGgertosearch
Copy the trigger settings
to the search settings.
Set