GW Instek GDS-1000B Series - Search:trigger:edge:slop; Search:trigger:source

GDS-1000B Programming Manual
190
Parameter/Return
parameter
EDGe
Edge trigger
PULSEWidth
Pulse width trigger
RUNT
Runt trigger
RISEFall
Rise and Fall trigger
FFTPeak
FFT Peak trigger
BUS
Bus trigger
Example
:SEARCH:TRIGger:TYPe EDGE
Sets the search trigger to the edge type.
:SEARCH:TRIGger:SOURce
Description
Sets or queries the search trigger source.
Syntax
:SEARCH:TRIGger:SOURce {CH1 | CH2 | CH3 | CH4
| ? }
Parameter/Return
parameter
CH1 to CH4
Channel 1 to Channel 4
Example
:SEARCH:TRIGger:SOURce CH1
Sets the search trigger source as CH1.
:SEARCH:TRIGger:EDGE:SLOP
Description
Sets or queries the search trigger slope.
Syntax
:SEARCH:TRIGger:EDGe:SLOP { RISe | FALL | EITher
| ? }
Related
commands
:SEARCH:TRIGger:TYPe
Parameter
RISe
Rising slope
FALL
Falling slope
EITher
Either rising or falling slope
Return parameter
Returns the trigger slope.
Set
Query
Set
Query