GW Instek GDS-1000B Series - Sav

COMMAND DETAILS
35
5.000E-01; :REF2:DISPlay OFF;TIMebase:POSition -
5.000E-05;SCALe 1.000E-05;OFFSet 4.400E-01; SCALe
5.000E-01;:REF3:DISPlay OFF;TIMebase:POSition
0.000E+00;SCALe 2.000E-04;OF FSet
0.000E+00;SCALe 5.000E-01;:REF4:DISPlay
OFF;TIMebase:POSition 0.000E+00;SCA Le 2.000E-
04;OFFSet 0.000E+00;SCALe 5.000E-
01;:SEARCH:STATE ON;:TOTAL
0;:TRIGger :TRIGger:TYPe ? &? :TRIGger:SOUrce
MATH;:TRIGger:EDGE:SLOP RISE;:TRIGger:LEVel
0.00?;:TRIGger:HLEVel 0.00?;:TRIGger:LLEVel
0.00?;:TRIGger:PULSEWidth:POLarity
POSITIVE;:TRIGger:RUNT:POLarity
POSITIVE;:TRIGger:RISEFall:SLOP RISE;:TRIGger:PU
LSe:WHEn THAN;:TRIGger:PULSe:TIMe 4.000e-
08;:TRIGger:RUNT:WHEn THAN;:TRIGger:RUN
T:TIMe 4.000e-08;:TRIGger:RISEFall:WHEn
THAN;:TRIGger:RISEFall:TIMe 4.000e-08;:C
HANnel1:LABel ;:CHANnel2:LABel ;:REF1:LABel ;:REF
2:LABel ;:REF3:LABel ;:REF4:LAB
el ;:SET1:LABel ;:SET2:LABel ;:SET3:LABel ;:SET4:LABe
l ;:SET5:LABel ;:SET6:LABel ;:SET7:LABel ;:SET8:LABel
;:SET9:LABel ;:SET10:LABel ;:SET11:LABel ;:SET12:LAB
el ;:SET13:LABel ;:SET14:LABel ;:SET15:LABel ;:SET16:
LABel ;:SET17:LABel ;:SET18:
LABel ;:SET19:LABel ;:SET20:LABel ;:CHANnel1:LABel:
DISPlay OFF;:CHANnel2:LABel:D ISPlay
OFF;:REF0:LABel:DISPlay OFF;:REF1:LABel:DISPlay
OFF;:REF2:LABel:DISPlay O FF;:REF3:LABel:DISPlay
OFF;:BUZZER OFF
*SAV
Description
Saves the current panel settings to the selected
memory number( setup 1 ~ 20).
Syntax
*SAV {1 | 2 | 3 |…. | 20}
Example
*SAV 1
Saves the current panel settings to Set 1.
Set