GW Instek GDS-1000B Series - Trigger:bus:b1:Lin:condition

COMMAND DETAILS
157
Parameter/
Return parameter
<string>
The size of the string depends on the
data size setting. The string must be
enclosed in double quotes, “string”.
String contents:
x = don’t care
1 = binary 1
0 = binary 0
Example
:TRIGger:BUS:B1:CAN:DATa:SIZe 1
:TRIGger:BUS:B1:CAN:DATa:VALue "01010X1X"
:TRIGger:BUS:B1:CAN:DATa:VALue?
>01010X1X
:TRIGger:BUS:B1:LIN:CONDition
Description
Sets or returns the LIN trigger condition.
Note
This command is only applicable when the Serial
Bus Decode (DS1B-BUS) option is installed. See the
user manual for details.
Syntax
:TRIGger:BUS:B1:LIN:CONDition
{SYNCField|IDentifier|DATA|IDANDDATA|WAKEup|
SLEEP|ERRor|?}
Set
Query