GW Instek GDS-1000B Series - Segments:measure:plot:divide; Segments:measure:plot:source

GDS-1000B Programming Manual
230
Parameter/
Return parameter
OFF
Disables the automatic measurement
function for the segments
measurement.
PLOT
Sets the measurement mode to
Statistics.
TABLE
Sets the measurement mode to a
measurement list.
Example
:SEGMents:MEASure:MODe?
>PLOT
Returns the measurement mode as Statistics.
:SEGMents:MEASure:PLOT:SOURce
Description
Sets or queries the statistics source.
Syntax
:SEGMents:MEASure:PLOT:SOURce {<NR1> | ? }
Related
commands
:SEGMents:MEASure:MODe
:SEGMents:MEASure:PLOT:DIVide
:SEGMents:MEASure:PLOT:SELect
:SEGMents:MEASure:PLOT:RESults
Parameter/
Return parameter
<NR1>
1~8 (Automatic measurement item
1~8)
Example1
:SEGMents:MEASure:PLOT:SOURce 1
Sets the source as auto measurement item 1.
:SEGMents:MEASure:PLOT:DIVide
Description
Sets or queries the number of bins for the statistics
function.
Syntax
:SEGMents:MEASure:PLOT:DIVide {<NR1> | ? }
Related
commands
:SEGMents:MEASure:PLOT:SOURce
:SEGMents:MEASure:PLOT:SELect
Set
Query
Set
Query