GW Instek GDS-1000B Series - Segments:dispall; Segments:measure:mode; Segments:time

COMMAND DETAILS
229
:SEGMents:TIMe
Description
Returns the time of the current segment in relation
to the first segment.
Syntax
:SEGMents:TIMe?
Related
commands
:SEGMents:STATE
:SEGMents:CURRent
Return parameter
The segment time as <NR3>.
Example
:SEGMents:TIMe?
>8.040E-03
Returns the segment time.
:SEGMents:DISPALL
Description
Sets or queries whether all the segments are
displayed on the screen.
Syntax
:SEGMents:DISPALL {OFF|ON|?}
Related
commands
:SEGMents:STATE
:SEGMents:CURRent
Parameter/
Return parameter
OFF
Turns the display all function off.
ON
Turns the display all function on.
Example1
:SEGMents:DISPALL ON
Turns the display all function on.
:SEGMents:MEASure:MODe
Description
Sets or queries the measurement mode.
Syntax
:SEGMents:MEASure:MODe {OFF|PLOT|TABle|?}
Related
commands
:MEASUrement:MEAS<x>
Query
Set
Query
Set
Query