GW Instek GDS-1000B Series - Search:trigger:llevel; Search:trigger:pulsewidth:polarity

GDS-1000B Programming Manual
192
Example
:SEARCH:TRIGger:HLEVel 3.30E-1
Sets the high level search trigger to 330mV/mA.
:SEARCH:TRIGger:LLEVel
Description
Sets or queries the low level search trigger.
Note
Applicable for Rise and Fall/Pulse Runt triggers.
Syntax
:SEARCH:TRIGger:LLEVel { <NRf> | ?}
Related
commands
:SEARCH:TRIGger:TYPe
Parameter
<NRf>
Low level value.
Return parameter
<NR3>
Returns the low level.
Example
:SEARCH:TRIGger:LLEVel -3.30E-3
Sets the low level search trigger to 330mV/mA.
:SEARCH:TRIGger:PULSEWidth:POLarity
Description
Sets or queries the pulse width search trigger
polarity.
Syntax
:SEARCH:TRIGger:PULSEWidth:POLarity
{POSitive | NEGative | ?}
Related
commands
:SEARCH:TRIGger:TYPe
Parameter
POSitive
Positive polarity
NEGative
Negative polarity
Return parameter
Returns the pulse width polarity.
Example
:SEARCH:TRIGger:PULSEWidth:POLarity POSitive
Sets the pulse width polarity to positive.
Set
Query
Set
Query