GW Instek GDS-1000B Series - Cursor:xy:product:delta; Cursor:xy:product:position<X; Cursor:xy:ratio:position<X

GDS-1000B Programming Manual
72
Syntax
:CURSor:XY:POLar:THETA:DELta{?}
Return parameter
<NR3>
Returns the theta delta between cursor1
and cursor2.
Example
:CURSor:XY:POLar:THETA:DELta?
9.10E+0
Returns the delta as 9.1˚.
:CURSor:XY:PRODuct:POSition<X>
Description
Queries the product in XY mode for the specified
cursor, where x can be either 1 or 2.
Syntax
:CURSor:XY:PRODuct:POSition<X>{?}
Parameter
<X>
1, 2 (Cursor 1, Cursor 2)
Return parameter
<NR3>
Returns the product value of the Cursor1 or
Cursor2.
Example
:CURSor:XY:PRODuct:POSition1?
9.44E-5
Returns the product of cursor1 as 94.4uVV.
:CURSor:XY:PRODuct:DELta
Description
Queries the product delta in XY mode.
Syntax
:CURSor:XY:PRODuct:DELta{?}
Return parameter
<NR3>
Returns the product delta.
Example
:CURSor:XY:PRODuct:DELta?
1.22E-5
Returns the product delta as 12.2uVV.
:CURSor:XY:RATio:POSition<X>
Description
Queries the ratio in XY mode for the specified
cursor, where x can be either cursor 1 or 2.
Query
Query
Query