GW Instek GDS-1000B Series - Segments:save:select:start; Segments:save:source

GDS-1000B Programming Manual
234
Example
:SEGMents:SAVe:SOURce CH1
:SEGMents:SAVe:SELect:STARt 1
:SEGMents:SAVe:SELect:END 10
:SEGMents:SAVe
:SEGMents:SAVe:SOURce
Description
Sets or queries the source segment waveform to
save.
Syntax
:SEGMents:SAVe:SOURce {CH1 | CH2 | CH3 |
CH4 | ? }
Parameter/
Return parameter
CH1~CH4
Channel 1 to 4.
Example
:SEGMents:SAVe:SOURce CH1
>Sets the source to CH1.
:SEGMents:SAVe:SELect:STARt
Description
Sets or queries the starting segment to save from.
The number of possible segments depends on the
record length.
Syntax
:SEGMents:SAVe:SELect:STARt
{SETTOMIN | SETTOMAX | <NR1> | ? }
Related
commands
:SEGMents:TOTalnum
Parameter/
Return parameter
SETTOMIN
Sets the starting segment to min
segment.
SETTOMAX
Sets the starting segment to the max
segment.
<NR1>
Sets the starting segment to 1~29000.
Example
:SEGMents:SAVe:SELect:STARt 2
Sets the starting segment to segment number 2.
Set
Query
Set
Query