GW Instek GDS-1000B Series

To Next Page

To Previous Page

COMMAND DETAILS

105

:MEASure:PHAse

Description

Returns the phase between source 1 and source 2.

Syntax

:MEASure:PHAse{?}

Commands

:MEASure:SOURce<X>

Return parameter

<NR3>

Returns the phase difference.

Chan Off

Indicates the source channel is not

activated.

Note

Select the two source channels before entering this

command.

Example

:MEASure:SOURce1 CH1

:MEASure:SOURce2 CH2

:MEASure:PHAse?

4.50E+01

Select channel 1 and 2 as phase source1/2, and

then measure the phase in degrees.

Query

GW Instek GDS-1000B Series - Measure:phase