GW Instek GDS-1000B Series Programming Manual

COMMAND DETAILS
175
Example
:BUS1:UART:DATABits 7
Sets the UART frame to 7 bits.
:BUS1:UART:PARIty
Description
Sets or queries the UART bus parity.
Syntax
:BUS1:UART:PARIty { <NR1> | ? }
Parameter/Return
parameter
<NR1>
0: None
1: Odd parity
2: Even parity
Example
:BUS1:UART:PARIty 1
Sets the parity to odd.
:BUS1:UART:PACKEt
Description
Sets or queries the UART packet setting.
Syntax
:BUS1:UART:PACKEt {<NR1> | ? }
Parameter/Return
parameter
<NR1>
0: Off
1: On
Example
:BUS1:UART:PACKEt 1
Turns UART packets on.
:BUS1:UART:EOFPAcket
Description
Sets or queries the EOF character for the UART
packet setting.
Syntax
:BUS1:UART:EOFPAcket <NR1>
Set
Query
Set
Query
Set
Query

GW Instek GDS-1000B Series Specifications

General

Brand	GW Instek
Model	GDS-1000B Series
Category	Test Equipment
Language	English