GW Instek GDS-1000B Series - Page 245

COMMAND DETAILS
245
Related
commands
:DATALOG:STATE
:DATALOG:SAVe
:DATALOG:INTerval
:DATALOG:DURation
Parameter/Return
parameter
CH1 ~CH4
Channel 1, 2, 3 or 4
all
All displayed channels.
Example
:DATALOG:SOURce CH1
Sets the source to CH1.
:DATALOG:SAVe
Description
Sets or queries the save format as image or
waveform.
Syntax
:DATALOG:SAVe {IMAGe|WAVEform|?}
Related
commands
:DATALOG:STATE
:DATALOG:SOURce
:DATALOG:INTerval
:DATALOG:DURation
Parameter/Return
parameter
IMAGe
Save as images.
WAVEform
Save as waveforms.
Example
:DATALOG:SAVe WAVEform
Sets the save format to waveform.
:DATALOG:INTerval
Description
Sets or queries the recording interval time in
seconds. The interval times that can be set are
dependent on the settings of the
DATALOG:SOURCE and DATALOG:SAVE
commands.
Syntax
:DATALOG:INTerval {<NR1>|?}
Set
Query
Set
Query