GW Instek GDS-1000B Series - Page 7

INTERFACE OVERVIEW
7
USB Functionality Check
Terminal
Application
Invoke a terminal application such as RealTerm.
Set the COM port, baud rate, stop bit, data bit, and
parity accordingly.
To check the COM port number and associated
port settings, see the Device Manager in the PC.
For Windows 7:
Control panel → Hardware and Sound→ Device
Manager
Example: Configuring RealTerm:
Functionality
Check
Key in this query command via the terminal
application.
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version in
the following format.
GW,GDS-1202B,PXXXXXX,V1.00
Note
For further details about remote control and remote
commands, please see the GDS-1000B programming
manual, available on the GW Instek website.