GPT-9500 Series User Manual
150
Firmware Setting
This section is for updating the latest firmware.
1. Press the UTILITY key on the front
panel followed by using the scroll
wheel to move to the Firmware.
Press the ENTER soft-key to enter
the Firmware field.
2. Press the ENTER soft-key to Check
USB Files (Step 1) and the qualified
firmware version will be shown with
OK message.
Prior to update, make sure if the required
firmware file (IMAGE.BIN) is stored within the
plugged USB. If the firmware file is with name
other than IMAGE.BIN, the file could Not be
recognized by the unit properly.
To Next Page
Loading...
