GW Instek GPT-9500 Series - ACW Frequency Setting

UTILITY
169
ACW Frequency Setting (for MANU)
Description
A test frequency of 60Hz or 50Hz can be set,
regardless of the input line voltage. The test
frequency setting only applies to ACW test.
Steps
1. Press the UTILITY key on the front
panel followed by pressing the
PAGE DOWN soft-key repeatedly
until the Test page appears.
UTILITY
2. Use the scroll wheel to move to the
ACW Frequency field.
3. Press ENTER soft-key to enter the
ACW Frequency field. Use scroll
wheel to select an option.