GW Instek GPT-9500 Series - Memory Commands; Memory:delete:location; Memory:free:step; Memory:free:state

GPT-9500 Series User Manual
216
Memory Commands
:MEMory:DELete:LOCAtion ..................................................... 216
:MEMory:FREE:STEP? ............................................................... 216
:MEMory:FREE:STATe? ............................................................. 216
:MEMory:STATe:DEFine ........................................................... 217
:MEMory:STATe:DEFine? ......................................................... 217
:MEMory:STATe:LABel? ........................................................... 217
:MEMory:NSTates? ..................................................................... 218
:MEMory:DELete:LOCAtion
This command deletes the parameter data in the main memory.
Parameter: <NR1>(1 ~ 99)
Example: MEM:DEL:LOCA 1
It means to delete the first group of parameter data in the main
memory.
:MEMory:FREE:STEP?
Returns the rest MANU step number in the main memory.
Return parameter: <NR1> (rested MANU step), <NR1> (used
MANU step)
Example: MEM:FREE:STEP?
> 495,5
Rested 495 MANU step, used 5 MANU step
:MEMory:FREE:STATe?
Returns the rest AUTO step number in the main memory.
Return parameter: <NR1> (rested step), <NR1> (used step)
Example: MEM:FREE:STAT?