GPT-9500 Series User Manual
172
GFCI Setting (for MANU)
GFCI function, Ground Fail Check Interrupt, is
particularly designed to detect if any electrical
leakage or accidental interruption between DUT
and GPT-9500. Once issue occurs, output will be
stopped and warning message shows accordingly.
To activate GFCI, the GR MODE should be
disabled for test. Refer to page 63 for details.
1. Press the UTILITY key on the front
panel followed by pressing the
PAGE DOWN soft-key repeatedly
until the Test page appears.
2. Use the scroll wheel to move to the
GFCI field.
To Next Page
Loading...
