GW Instek GPT-9500 Series - Pass Hold Setting

GPT-9500 Series User Manual
170
AC FREQ
50Hz, 60Hz
4. Press the ENTER soft-key to
confirm the setting.
Pass Hold Setting (for MANU)
Description
The PASS HOLD setting refers to the holding
duration after PASS judgment is shown on the
display. When the PASS HOLD setting is set, a
PASS judgment is held until the set duration is
fully reached.
Steps
1. Press the UTILITY key on the front
panel followed by pressing the
PAGE DOWN soft-key repeatedly
until the Test page appears.
UTILITY
2. Use the scroll wheel to move to the
Pass Hold field.