GW Instek GPT-9500 Series - System:local; System:remote; System:rwlock; System:scpi:auto:save

GPT-9500 Series User Manual
214
:SYSTem:SCPi:AUTO:SAVE
Do the setting parameters need to be saved automatically for
SCPI command?
Parameter: 0 | 1, 1=ON, 0=OFF.
Example: SYST:SCP:AUTO:SAVE ON.
Sets the parameters automatically saved.
* Parameters auto saving generally takes some time. Hence, it
is suggested to disable the function when no necessity occurs.
:SYSTem:SCPi:AUTO:SAVE?
Returns the autosave for scpi command mode.
Parameter: 0 | 1.
:SYSTem:LOCal
Enables local control (front panel control) and disables remote
control.
:SYSTem:REMote
Enables remote control and disables local control (front panel
control), all key are disabled except ESC key (return to local
control).
:SYSTem:RWLock
Enables remote control and disables local control (front panel
control, all key are disable).