GW Instek GPT-9500 Series User Manual

GPT-9500 Series User Manual
154
Test Setting
Control Setting
Description
Control By is used to determine how a test is
started from the front panel (START/STOP keys)
or from a SIGNAL I/O port or from both methods.
Steps
1. Press the UTILITY key on the front
panel followed by pressing the
PAGE DOWN soft-key repeatedly
until the Test page appears.
UTILITY
2. Press the ENTER soft-key to enter
the Control By field. Use the scroll
wheel to select a target method.
Control By
Front, Signal, Both
3. Press the ENTER soft-key to
confirm the setting.

GW Instek GPT-9500 Series Specifications

General

Brand	GW Instek
Model	GPT-9500 Series
Category	Test Equipment
Language	English