GW Instek GPT-9500 Series User Manual

REMOTE CONTROL
223
[:SOURce]:SAFEty:FETCh?
Returns the metered data. The < item > is character data.
Parameter: <item>[,<item>][,<item>]
The command responds the following data:
ITEM
Responding Data
STEP
The step number.
MODE
The test mode.
OMETerage
The value of output meter.
MMETerage
The value of measure meter.
RMETerage
The value of real meter.
RELApsed
The elapse time of ramp.
RLEFt
The left time of ramp.
TELApsed
The elapse time of test.
TLEFt
The left time of test.
FELApsed
The elapse time of fall.
FLEFt
The left time of fall.
DELApsed
The elapse time of dwell.
DLEFt
The left time of dwell.
CHANnel
The scan box status.
Example: SAFE:FETC? STEP,MODE,OMET
> 1;AC;+5.000000E+02
Returns the current STEP, MODE and output value results
which are STEP1, AC MODE and 0.500kV.
[:SOURce]:SAFEty:STARt[:ONCE]
Starts the test.
Parameter: NONE
Example: SAFE:STAR

GW Instek GPT-9500 Series Specifications

General

Brand	GW Instek
Model	GPT-9500 Series
Category	Test Equipment
Language	English