OPERATION
71
Setting the Pause (PA) Step
Basically, Pause (PA) step under MANU mode
is specifically for AUTO mode. It provides,
based on differed applications, a pause action,
which is equivalent to an interval, within
AUTO group. User is able to define some
parameters for the set PA step.
1. Press the MANU/AUTO soft-
key to select MANU option.
2. Press the EDIT soft-key followed
by clicking the MODE soft-key.
3. Use the scroll wheel to select the
PA option.
4. Press the TIME soft-key followed
by using the scroll wheel to
define a time period in which PA
step will be shown on screen.
CONT.: Infinite time until START key
000.3s~999.9s
To Next Page
Loading...
