GW Instek GPT-9500 Series User Manual

REMOTE CONTROL
271
*STB?
The controller is for reading status bit register value.
Return parameter:<NR1>(0 ~ 255)
*OPC
Operation is completed command.
*OPC?
Operation complete query command.
The output format is ASCII character " 1 ".
*PSC
Power on status clear command.
Parameter: 0 | 1
*PSC?
Returns the Power on status clear.
Return parameter: 0 | 1
*RST
The device reset command available for RS232 interface only.

GW Instek GPT-9500 Series Specifications

General

Brand	GW Instek
Model	GPT-9500 Series
Category	Test Equipment
Language	English