GW Instek GPT-9500 Series User Manual

GPT-9500 Series User Manual
98
STEP HOLD
Background
The STEP HOLD setting refers to the holding
duration after each step within a AUTO group
1. Use the PREV & NEXT keys or
scroll wheel to move to the STEP
HOLD field.
2. Press the ENTER soft-key followed
by using the scroll wheel to select
an option. When TIME is selected,
define an H-TIME by using the
arrow keys and the scroll wheel.
TIME
Step is held until the set duration (H-
TIME) is reached. 000.2 ~ 999.9 sec
KEY
Step is held until the START key is
pressed.
3. Press the ENTER soft-key to
confirm the setting
Note
The STOP key can be pressed at any time in the set
duration of STEP HOLD to promptly halt the set
STEP HOLD duration.

GW Instek GPT-9500 Series Specifications

General

Brand	GW Instek
Model	GPT-9500 Series
Category	Test Equipment
Language	English