REMOTE CONTROL
209
:SYSTem:ERRor:[NEXT]?
Returns the current system error, if any.
:SYSTem:BEEPer[:IMMediate]
Makes buzzer beep once.
Parameter: <None>
Example: SYST:BEEP:IMM
:SYSTem:BEEPer:STATe
Turns the buzzer on/off.
Parameter: 0 | 1 | ON | OFF
Example: SYST:BEEP:STAT 0FF
Turns the buzzer off.
* The key sound of front panel is Not affected by the state.
* The command of SYSTem:BEEPer is Not affected by the state.
:SYSTem:BEEPer:STATe?
Returns the buzzer state.
Return parameter: 0 | 1, 1=ON, 0=OFF.
:SYSTem:BEEPer:ERRor
Sets the beeper to sound for an SCPI error.
Parameter: 0 | 1 | ON | OFF
Example: SYST:BEEP:ERR ON
Allows the beeper to sound when an SCPI error occurs.
To Next Page
Loading...
Need help?
General
