When multiple channels are set “H”
simultaneously, it is required to apply to the DUTs
of identical property with total leaking current
composed of the total amount from each channel.
And properly adjust the set current value while
considering the leaking current change from each
DUT. Be aware that there is certain degree of
uncertainty from this test. Be advised to
manipulate multi-channels output test when DUTs
are of high yield rate and stability.
Each MANU test can have a user-defined name
(default: IEC-M00XXX) up to 13 characters
long. See the available list of characters below.
To Next Page
Loading...
Need help?
General
