GW Instek GPT-9500 Series - Auto Range Setting

GPT-9500 Series User Manual
174
Auto Range Setting (for MANU)
Description
Specifically for DCW test, the unit for measured
current can be determined by user preferences.
Note
AUTO RANGE is only applicable to DCW test.
Steps
1. Press the UTILITY key on the front
panel followed by pressing the
PAGE DOWN soft-key repeatedly
until the Test page appears.
UTILITY
2. Use the scroll wheel to move to the
Auto Range field.
3. Press ENTER soft-key to enter the
Auto Range field. Use scroll wheel
to select ON/OFF option.