GPT-9500 Series User Manual
116
Page View in AUTO Test
To have overall yet quick glimpse on each step
of same AUTO group, use the function below.
1. Make sure the unit is within the READY status
under AUTO mode. If it is under VIEW status,
press the STOP key to return to the READY
status. Alternatively, if it is under the EDIT
status, press the SAVE soft-key followed by the
STOP key to return to the READY status.
2. Press the PAGE key to enter the
AUTO list page.
3. Use the left and right arrow keys
to toggle between 2 pages, and
utilize the scroll wheel to move
among each MANU step.
1
AUTO steps list – page 1
The page 1, in addition to the fixed serial
number (SN), MANU step number (STEP) and
MODE), includes the set test VOLT, HI & LO
SET as well as SCAN deployment.
To Next Page
Loading...
Need help?
General
