Hitachi VSP G400 System Administration Guide

The attributes are defined in the following tables.
Table 7 RADIUS definition (for authentication server)
Attribute Description
Required /
Optional
Default
value
auth.server.type Type of an authentication server. Specify
radius.
Required None
auth.server.name The name of an authentication server.
When registering a primary and
secondary server, use a comma to
separate the names. The name of the
server, including the primary name,
secondary name, and the comma (1
byte) must be 64 bytes or less.
The names can use all ASCII code
characters except for the following:
\ / : , ; * ? " < > | $ % & ' ˜
In this manual, the value specified here is
called server-name hereafter.
Required None
auth.group.mapping Information about whether to work
together with an authorization server
• true: Works together
• false: Does not work together
Optional False
auth.radius.server-
name.protocol
RADIUS protocol to use.
• PAP: Password authentication protocol
that transmits plaintext user ID and
password
• CHAP: Challenge-handshake
authentication protocol that transmits
encrypted password
Required None
auth.radius.server-
name.host
A host name, an IPv4 address or an IPv6
address of the RADIUS server. An IPv6
address must be enclosed in square
brackets.
Required None
auth.radius.server-
name.port
A port number of the RADIUS server.
Must be between 1 and 65,535.
1
Optional 1,812
auth.radius.server-
name.timeout
The number of seconds before the
connection to the RADIUS server times
out.
Must be between 1 and 30.
2
Optional 10
auth.radius.server-
name.secret
RADIUS secret key used for PAP or CHAP
authentication
Required None
auth.radius.server-
name.retry.times
Retry times when the connection to the
RADIUS server fails.
Must be between 0 and 3. 0 means no
retry.
1
Optional 3
User administration 191
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English