Hitachi VSP G400 System Administration Guide

Attribute Description
Required /
Optional
Default
value
auth.radius.server-
name.attr.NASIdentifier
Identifier for the RADIUS server to find
SVP. Specify this value if the attr.NAS-
Identifier attribute is used in your
RADIUS environment. ASCII codes up to
253 bytes long are accepted.
Optional
2
None
auth.radius.server-
name.attr.NAS-IPv4-
Address
IPv4 address of the SVP. Specify the
value of the NAS-IP-Address attribute.
This value is transmitted to the RADIUS
server when the authentication is
requested.
Optional
2
None
auth.radius.server-
name.attr.NAS-IPv6-
Address
IPv6 address of the SVP. Specify the
value of the NAS-IPv6-Address attribute.
This value is transmitted to the RADIUS
server when the authentication is
requested.
Optional
2
None
Notes:
1. If the specified value is not applicable, the default value will be used.
2. When NAS modules are installed, set NAS-Identifier, NAS-IP-Address, or NAS-IPv6-
Address.
Table 8 RADIUS definition (for authorization server)
Attribute Description
Required /
Optional
Default
value
auth.radius.server-
name.domain.name
A domain name that the LDAP server
manages. In this manual, the value
specified here is called domain-name
hereafter.
Required None
auth.radius.server-
name.dns_lookup
Information about whether to search the
LDAP server with the information
registered in the SRV records in the DNS
server.
• true: Searches with the information
registered in the SRV records in the
DNS server
• false: Searches with the host name
and port number.
When "host" and "port" are specified, the
LDAP server is not searched with the
information registered in the SRV records
by specifying "true".
Optional false
auth.radius.domain-
name.protocol
LDAP protocol to use.
• ldaps: Uses LDAP over SSL/TLS.
• starttls: Uses StartTLS.
Required None
192 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English