EasyManuals Logo

Hitachi VSP G400 System Administration Guide

Hitachi VSP G400
414 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #195 background imageLoading...
Page #195 background image
Attribute Description
Required /
Optional
Default value
not searched with the information
registered in the SRV records by
specifying "true".
auth.kerberos.clockske
w
The acceptable range of the
difference in time between the SVP
and the Kerberos server where the
SVP is operating.
Must be between 0 and 300
seconds.
1
Optional 300
auth.kerberos.timeout The number of seconds before the
connection to the RADIUS server
times out. Must be between 1 and
30. When 0 is specified, the
connection does not time out until a
communication error occurs.
1
Optonal 10
auth.kerberos.realm_n
ame
Realm identifier name
Any name to distinguish the
information of Kerberos server in
each realm. Duplicate names cannot
be used. If you register multiple
names, use a comma to separate
the names. The value specified here
is called <realm_name> hereafter.
Optional
2
None
auth.kerberos.<realm
_name>.realm
The realm name set to the Kerberos
server.
Optional
2
None
auth.kerberos.<realm_
name>.kdc
The host name, the IPv4 address,
and the port number of the Kerberos
server. Specify these in the format
of "<Host name or IP
address>[:Port number]".
Optional
2
None
Notes:
1. The item can be omitted if true is specified for "auth.ldap.<server_name>.dns_lookup".
2. If the specified value is not valid, the default value will be used.
3. To use symbols such as + ; , < = and >, enter a backslash (\) before each symbol. When
using multiple symbols, each symbol must have a backslash before it. For example, to enter
abc++ in the searchdn field, use \+ instead of + as shown here: abc\+\+
To enter \ , /, or ", enter a backslash and then the ASCII code in hex for these symbols.
• Enter \5c for \.
• Enter \2f for /.
• Enter \22 for ".
For example, to enter abc\ in the searchdn field, enter abc\5c.
Table 10 Kerberos definition (for authorization server)
Attribute Description Required / Optional Default value
auth.group.<realm_na
me>.protocol
LDAP protocol to use. Required None
User administration 195
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Table of Contents

Other manuals for Hitachi VSP G400

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi VSP G400 and is the answer not in the manual?

Hitachi VSP G400 Specifications

General IconGeneral
BrandHitachi
ModelVSP G400
CategoryStorage
LanguageEnglish

Related product manuals