Hitachi VSP G400 - Page 196

Attribute Description Required / Optional Default value
• ldaps: Uses LDAP
over SSL/TLS.
• starttls: Uses
StartTLS.
auth.group.<realm_na
me>.port
A port number of the
LDAP server.
Must be between 1 and
65535.
1
Optoinal 389
auth.group.<realm_na
me>.searchdn
DN of the user for
searching.
2
Required None
auth.group.<realm_na
me>.searchpw
Password of the user
for searching. Specify
the same password
that is registered in the
LDAP server.
Required None
auth.group.<realm_na
me>.basedn
BaseDN when the
search for users
begins. When
searching, specify the
hierarchy DN, including
all the users, because
the targeted user for
the search is in a lower
hierarchy than the
specified DN.
2
Optional abbr
auth.group.<realm_na
me>.timeout
Number of seconds
before the connection
to the LDAP server
times out. Must be
between 1 and 30
seconds. When 0 is
specified, the
connection does not
time out until a
communication error
occurs.
1
Optional 10
auth.group.<realm_na
me>.retry.interval
Retry interval in
seconds when the
connection to the LDAP
server fails. Must be
between 1 and 5.
1
Optional 1
auth.group.<realm_na
me>.retry.times
Retry times when the
connection to the LDAP
server fails. Must be
between 0 and 3. 0
means no retry.
1
Optional 3
Notes:
1. If the specified value is not valid, the default value will be used.
196 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models