Hitachi VSP G400 System Administration Guide

Item/Field Description
You cannot change the User Type or User Level of a user. If such a
change is needed, delete the old user and create a new user.
Read-Only Access Indicates if a user is defined as read-only, or not. When displaying
the details of an existing user, the read-only attribute is shown
but cannot be modified. To change the read-only attribute, it is
necessary to delete the user and then re-add them.
SMU CLI Access For global administrators only, when the check box is selected,
the administrator can access the SMU using the CLI as well as
NAS Manager.
Available HNAS Servers Not available for global administrators, because global
administrators are allowed to manage all storage and all servers.
For server administrators, storage administrators, and server
+storage administrators, lists the HNAS servers managed by the
SMU to which the administrator has not yet been give
management privileges.
The "All Servers" entry is used to allow privileges to all servers
managed by the SMU.
Selected HNAS Servers Not available for global administrators, because global
administrators are allowed to manage all storage and all servers.
For server administrators, lists the HNAS servers that the
administrator can manage. Note that a Server administrator
cannot manage the storage attached to these servers.
For storage administrators, lists HNAS servers that have attached
storage that the administrator can manage. Note that a storage
administrator cannot manage these servers, only the storage
attached to these servers.
For server+storage administrators, lists HNAS servers that the
administrator can manage. The server+storage administrator can
also manage the storage attached to these servers.
OK Saves the currently defined user profile and returns to the SMU
Users page.
Cancel Returns to the SMU Users page without saving the profile.
3. Edit the SMU user password.
Note: For users authenticated by the SMU only (local users), not
available for users authenticated by a RADIUS server.
To edit the user’s password, type the new password in the Password
and Confirm Password fields.
4. For global administrators only, allow or disallow SMU CLI access.
When the check box is selected, the administrator can access the SMU by
using the CLI as well as NAS Manager.
5. Specify server and/or storage management rights.
208 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English