Attachments C250 ... C370
Translation of Original Operating Manual 156319-04 191
WARNING
With an adjustment to full volume and
at full throttle, the implement servop-
ump may only be used after a warm-
up phase of 10 min. Alternatively, the
pump may be operated for 10 min at
half volume.
ADVICE
Switch on the key (1) only at a low
engine speed.
1. Turn the volume adjustment (1a) all the way
to the left.
2. Unlock the catch on the safety switch (1) and
press the switch downwards. Indicator lamp
lights up. The attachment is supplied with oil.
3. Increase the engine speed to the desired ro-
tational speed (see multifunction display).
4. Increase the working speed of the attachment
to the desired value by turning the volume
adjustment (1a) slowly to the right.
ADVICE
The maximum oil quantity of the at-
tachment (load) is determined by cor-
responding coding of the implement
coding adapter. This is always required
for operation.
ADVICE
The maximum displacement volume is
determined by the implement coding
adapter or the potentiometer position
(1a). The displacement volume is held
constant if the engine speed increas-
es or decreases. If the engine speed
falls below a defined range, the im-
plement servopump cannot compen-
sate the displacement volume (see di-
agram).
To Next Page
Loading...
