l
The Active suppression triggers section shows which alarms have triggered
the suppression.
l
The Suppressed alarms section shows which alarms are currently
suppressed by this suppression group.
l
Which alarms in this group can activate the suppression, and which alarms are
suppressed when this group is activated (Triggers and Targets tab).
l
The configuration settings for this suppression group (Properties tab). For an
explanation of the property settings, see the Station Configuration Guide.
Properties tab
4. To filter the list for specific alarm suppression groups, click the Suppression Group
column.
This displays a drop-down box in which you can enter filter values to display:
l
Suppression groups that include specific points, or
l
Specific suppression groups.
When filtering, you can use the same wildcard characters (* and ?) that you can use
when filtering alarms on the Alarm Summary.
You can also use the Suppression Group drop-down box to sort group names in
ascending or descending order.
Responding to alarms
Honeywell 2017 146
To Next Page
Loading...
Need help?
General
