Honeywell FlexLine SmartServo 954 User Manual

COMMISSIONING
92 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
Name Value Range Default Value Explanation
[Check bearings
raise height]
<0.02> Determines the raise height at
which the displacer is risen for
the bearings test
[Check bearings] This command activates the
check bearing test
[Measured bearings
status]
Shows the measured frequency,
bearings status and timestamp
after the command has been
given

Honeywell FlexLine SmartServo 954 Specifications

General

Brand	Honeywell
Model	FlexLine SmartServo 954
Category	Measuring Instruments
Language	English