Honeywell FlexLine SmartServo 954 User Manual

TROUBLE SHOOTING
Part No.: 4417340 Revision 1 Service Manual 289
954 SmartServo FlexLine
Status code
(SmartView)
Description
(Engauge)
Remarks
6191 Encoder LED pin malfunction Hardware error. Malfunction of the LED
of the reference encoder.
6208 Wire tension too high The wire tension is too high. The gauge
will resume functioning when the wire
tension issue is resolved (by e.g. moving
the displacer down). Refer to sections
7.7.3 and 11.1.
6209 Wire tension too low The wire tension is too low. The gauge
will resume functioning when the wire
tension issue is resolved (by e.g. moving
the displacer up). Refer to sections 7.7.3
and 11.1
6210 Density displace declined
6211 Boot self test failed
6212 Density license not available

Honeywell FlexLine SmartServo 954 Specifications

General

Brand	Honeywell
Model	FlexLine SmartServo 954
Category	Measuring Instruments
Language	English