COMMISSIONING
Part No.: 4417340 Revision 1 Service Manual 65
954 SmartServo FlexLine
The TII-SRV firmware supports the following configurable
compensations:
• Wire weight compensation
• Mechanical hysteresis elimination
• Magnet temperature compensation
• Tank shell temperature compensation for high tanks
• Compensation for wire expansion over temperature
• Wire elongation compensation for free wire
• Wire elongation compensation for wire on drum
• Density compensation for level measurement
• Hydrostatic deformation compensation
• Unbalance compensation
• Roof Immersion Compensation
• Drum temperature compensation
• Displacer volume compensation for pressure for density
measurement
• Displacer volume compensation for temperature for density
measurement
• Tilt compensation for density measurement
For correct functioning of the TII-SRV module in the instrument, the
following entities can be set by using either Engauge or some by
SmartView, summed up per Engauge tab.
To Next Page
Loading...
